Epifanes Interim Coat, White, set 750 grams
€32.50
€26.86
Levertijd: 2-3 days
A two-component primer / intermediate coat based on epoxy and vinyl resin. Good adhesion properties and impact resistance. Universal paintable with all types of one- and two-component coatings. Because Epifanes Interim Coat contains quartz, it has a coarse surface with an excellent mechanical bonding of the successive layers, however Epifanes Interim Coat not sanding.
Also available in 5 kg.
application:
General adhesive layer for indoor and outdoor, under and above the water line Bonding layer for a variety of antifoulings irrespective of which brand, on polyester and on two component (epoxy) substrates. Occlusive adhesive layer on epoxy systems.
Brush Application:
Epifanes Thinner D-601
Spray Processing:
Epifanes Thinner D-601
Pot life at 20 ° C:
1 hour
Advice:
Before this product is painted over, the Interim Coat first clean with Epifanes 1-C Spray dilution, benzene, water and ammonia in order to remove from the surface to be verharderresten. Thereafter, well let evaporate.
Recoat:
After 4 hours at 18 ° C. : Two-component epoxy products After 24 hours at 18 ° C .: antifouling coatings and topcoats maximum Unlimited
Recoat with:
Above / below the waterline: all two-component epoxy products Below water: all kinds of antifouling
Mileage:
8 m2 / l @ 35 micron
Recommended dry film thickness:
35 microns
Mixing ratio in volume:
Basis 86 parts of (A): 14 parts hardener (B)
Mix ratio by weight:
Basis 90 parts of (A): 10 parts hardener (B)
Article number | P745 |
---|---|
Stock | In stock at supplier |
Levertijd | 2-3 days |
Manufacturer | Epifanes |
Write Your Own Review